User`s guide
4-39
Maintenance and Adjustment / Replacement
4
[PH TO PH] adjustment procedure
Adjust the head position of each Print head, using K Print head as a reference.
Read the result of [PH TO PH] print and enter the appropriate value.
STEP 1
How to print the adjustment pattern [PH TO PH]
1
Set the printer to the oine. (Press
key.)
2
Press key twice to display ADJUST
MENU.
3
Press key and then key to display
[TEST PRINTS].
4
Press key, select [PH TO PH] and press
key.
5
Press key. Then the adjustment
pattern shown in the gure below is
printed.
#TEST PRINTS
*
EXECUTING
#TEST PRINTS
*
PH TO PH
#TEST PRINTS
*
NOZZLE PRINT
hPRINTER SETUPi
fADJUST HEATERg
hINK MEDIA REGi
fMEDIA M.ADVg
-32 -31 -30 -29 -28 -1
0 +1 +2 +3 +4 +31
[PH TO PH] print sample
media advance direction
q Head position adjustment