User`s guide

4-36
Adjustment procedure of [NOZZLE POS ADJ]
Adjust the nozzle position of each head. Enter the correction value according to
the print results of nozzle adjustment patterns. The nozzle adjustment is required
when the head is replaced.
STEP 1 How to print the adjustment pattern [NOZZLE POS ADJ]
1
Set the printer to the oine. (Press
key.)
2
Press key twice to display ADJUST.
3
Press key and then key to display
the adjustment pattern.
4
Press key to select [NOZZLE POS ADJ].
Then, press
key.
5
Press key. Then, the adjustment
pattern in the gure shown next page is
printed.
#TEST PRINTS
*
EXECUTING
#TEST PRINTS
*NOZZLE POS ADJ
#TEST PRINTS
*
NOZZLE PRINT
hPRINTER SETUPi
fADJUST HEATERg
hINK MEDIA REGi
fMEDIA M.ADVg