User`s guide

4-34
Adjustment procedure of [BIDIRECTION1/2/3]
Adjust the bi-direction position of each head. Reading the result of
[BIDIRECTION1], [BIDIRECTION2] and [BIDIRECTION3] print, enter the value.
STEP 1 How to print the adjustment pattern [BIDIRECTION1]
1
Set the printer to the oine. (Press
key.)
2
Press key twice to display ADJUST.
3
Press key and then key to display
the adjustment pattern.
4
Press key to select [BIDIRECTION1].
Then, press
key.
When adjusting [NORMAL2] print mode, select [BIDIRECTION2]
and adjusting [FINE DRAFT] print mode, select [BIDIRECTION3].
5
Press key. Then, the adjustment
pattern in the gure shown below is
printed.
#TEST PRINTS
*
EXECUTING
#TEST PRINTS
*
BIDIRECTION1
#TEST PRINTS
*
NOZZLE PRINT
hPRINTER SETUPi
fADJUST HEATERg
hINK MEDIA REGi
fMEDIA M.ADVg
-1
+31
-32
0
-31
+1
-30
+2
-29
+3
-28
+4
media advance direction
[BIDIRECTION] print sample