User`s guide
4-25
Maintenance and Adjustment / Replacement
4
This section describes [Wiper sponge replacement procedure].
Replace the Wiper sponge when the printer displays the replacement message.
The wiper sponge needs replacement about once every six months as a general
rule.
1
Set the printer to the oine and press
key to display PH.MAIN MENU.
2
Press key to enter in PH.MAIN MENU2.
Then, the cap cleaning menu is displayed.
3
Select [REPLACE WIPE SPONGE] with
key and press
key.
4
When the conrmation menu appears,
press
key.
5
Open the Front cover and the Cap cover.
6
Raise up a Wiper cleaning liquid bottle
a little and pull out the bottle after
conrming that all liquid ows in the
printer.
Note
- Visually check that the Waste ink bottle
is empty before removing
Wiper sponge replacement
hREWIND FORM FEEDi
fPH.REC PH.MAINg
#CAP CLEANING
>
#REPLACE WIPE SPONGE
>
1
2
#REPLACE WIPE SPONGE
*
OK ?
OPEN COVER
REPLACE WIPE SPONGE
REPLACE WIPE SPONGE
CLOSE COVER