User`s guide

4-21
Maintenance and Adjustment / Replacement
4
This section describes [Wiper blade replacement procedure]. Replace the Wiper
blade when the printer displays the replacement message or when a damage is
found on the Wiper blade during the daily inspection. Before replacement, locate
the tweezers (packed in the starter pack).
1
Set the printer to the oine and press
key to display PH.MAIN MENU.
2
Press key to enter in PH.MAIN MENU.
Then, the cap cleaning menu is displayed.
3
Select [REPLACE WIPER BLADE] with
key and press
key.
4
When the conrmation menu appears,
press
key.
The position of Wiper blade moves.
5
Open the Front cover and the Cap cover.
6
Pinch the lower edge of Wiper blade with
tweezers and unlock hooking of the plastic.
Wiper blade replacement
hREWIND FORM FEEDi
fPH.REC PH.MAINg
#CAP CLEANING
>
#REPLACE WIPER BLADE
>
REPLACE WIPER BLADE
CLOSE COVER
#REPLACE WIPER BLADE
*
OK ?
WIPER MOVING
PLEASE WAIT
1
2
OPEN COVER
REPLACE WIPER BLADE