User`s guide

4-11
Maintenance and Adjustment / Replacement
4
¢ When leaving the printer for more than 2 weeks powered o
Clean the Print head and the ink path using the Cleaning liquid.
Prepare the Cleaning liquid cartridge set (IP5-138).
(1) Head wash
Select PH.MAIN MENU from the operation panel and then the head wash. Follow
the instructions on the LCD screen.
After the head wash, perform the ink
lling so that 6 color inks are lled.
Note
- To protect the print head and the ink tubing, do not leave the ink container of the
printer empty without re-filling it with ink or storage liquid.
- Refrain from opening or closing the Front cover or lever while executing the
service clean and head wash. If done so, the operation need to be started from
the beginning . Ink and the cleaning liquid will be wasted.
(2) Filling the ink after the head wash
After performing the head wash, 6 color inks need to be lled in the printer.
Select PH.MAIN MENU from the operation panel and then the ink lling.
To ll inks, insert the ink cartridges of 6
colors.
After lling the inks, leave the printer for
at least 1 hour. Conrm that the wipe
sponge is wet. If necessary, make wet it further. Then, perform the nozzle print.
If missing nozzles are found on the nozzle print, perform [NORMAL ALL] from
PH.REC MENU.
#INK SYSTEM OPT
>CHARGE INK SYS
#INK SYSTEM OPT
>CLEAN INK SYS
q Periodic Maintenance