User`s guide
4-8
(6) Performing the nozzle print
The nozzle print is performed to conrm that the nozzles of Print head are not
blocked. Before printing each day or after cleaning the caps, run the nozzle print
to verify the Print head performance.
1
Set the printer to the oine. (Press
key.)
2
Press key twice to display ADJUST
MENU.
3
Press key to display the adjustment
pattern.
4
Press key.
5
Press key.
6
When pressing key, after performing
the warm-up, the adjustment pattern
shown in the next page is printed.
hINK MEDIA REGi
fMEDIA M.ADVg
hPRINTER SETUPi
fADJUST HEATERg
#TEST PRINTS
*
EXECUTING
#TEST PRINTS
>NOZZLE PRINT
#TEST PRINTS
>NOZZLE PRINT
#TEST PRINTS
*
OK
?