User`s guide

4-7
Maintenance and Adjustment / Replacement
4
6
Dip the Cap cleaning roller in the Cap
cleaning liquid.
Note
- Do not dip the Cap cleaning roller used
in cleaning once in the cap cleaning
liquid bottle. The Cap cleaning liquid
will be contaminated.
7
Clean on the surface of cap, rolling the Cap cleaning Roller.
Note
- The Cap cleaning roller is intended for a single use only. Use a new Cap cleaning
roller for each cleaning.
8
Close the Cap cover and the Front cover.
The carriage automatically returns to the original position.
Note
- Do not expose the Print heads for an unnecessarily long time when taking it out
of the Capping unit. Finish working quickly and cap the Print heads.
- After cleaned, if the lost print still occurs, remove foreign matters and ink
stains on the cap with the Cleaning swab soaked with cap cleaning liquid while
checking visually.
- Be careful for cap cleaning liquid not to stick parts other than the cap.
(5) Implementation of the Print head cleaning [NORMAL ALL]
Select PH.REC MENU from the operation panel and then [NORMAL ALL] to
perform the cleaning. (
P.4-19 [Print head cleaning])
First, roll the Cap cleaning roller on 6 caps at
the rightmost side, shuttling once each.
Next, roll the Cap cleaning roller on 6 caps at
the rightmost side, shuttling 10 times each.
1.
2.
q Periodic Maintenance