User`s guide

3-59
Operation panel of menu operation
q Explanation of each menu operation
3
HEATER MENU
Use this when setting heater delay time and heater standby time. To set the sys-
tem parameter, press
key.
(1) HEATER DELAY TIME
Select the language for LCD message.
( P.2-41)
<Parameter <selection input>)
00 to 30
(2) HEATER STANDBY TIME
Sets the time that the heater keeps the stand-
by temperature after printing is completed.
(Transition time to the standby temperature is
included)( P.2-41)
<Parameter (selection method)>
NONE Does not keep the standby temperature.
30 min Keeps the standby temperature for 30 minutes.
60 min Keeps the standby temperature for 1 hour.
90 min Keeps the standby temperature for an hour and half.
120 min Keeps the standby temperature for 2 hours.
CONTINUOUS Continues to keep the standby temperature.
#HEATER STANDBY TIME
>30 min
key
#HEATER DELAY TIME
>05min
#HEATER DELAY TIME
>05min
hPRINTER SETUPi
fADJUST HEATERg