User`s guide

3-56
#MAIN PCA VER
*
XXXXX
(7) BEEP
This function sets whether or not the warning
beep sounds in the condition below
- State that the Print head is dislocated from
the cap in the daily maintenance or height
adjustment
- State that due to media jamming (media
stack) error during printing the Print head
cannot be capped
- When conrming the Print head
- When the base (origin) is being set
<Parameter (selection method)>
ON The beep sounds.
OFF The beep does not sound.*
* Irrespective of this setting, when the normal error occurs, the beep
sounds.
(8) BOOT Version
This displays the BOOT version.
<Parameter (execution method)>
None
(9) F/W version
This displays the version of system F/W.
<Parameter (execution method)>
None
(10) LEE version
This displays the version of LEE board.
<Parameter (execution method)>
None
#BOOT VERSION
*
X.XX
#PRINTER FW VER
*
X.XX_YY
#BEEP
>ON