User`s guide

3-55
Operation panel of menu operation
q Explanation of each menu operation
3
(3) Length Unit
Select the length unit when displaying various
parameters.
<Parameter (selection method)>
MILLIMETER
This displays in the meter unit system of mm (millimeter) or m (meter)
INCH This displays in the inch unit system of “ (inch) or ft (feet).
(4) Temperature Unit
Select a temperature unit.
<Parameter (selection method)>
CENTIGRADE Centigrade
FAHRENHEIT Fahrenheit
(5) INK TYPES
Select an ink type.
<Parameter (selection method)>
LX To apply EG-Outdoor LX, select this.
EX To apply EG-Outdoor EX, select this.
Note
- EG-Outdoor LX and EG-Outdoor EX cannot be mixed or applied concurrently.
(6) Head warming-up
Set the head warming-up.
<Parameter (selection method)>
ON When the temperature is low, the head warming-up is ex-
ecuted. (Normally use this mode.)
OFF When the temperature is low, the head warming-up is not
executed.
Note
-
When this mode is turned o, the head warming-up is automatically canceled.
- See P.5-3 [Although the printer is in the print mode, printing does not start with "PH
WARMING UP" displayed on the operation panel.]
#LENGTH UNITS
>MILLIMETER
#TEMPERATURE UNITS
>CENTIGRADE
#INK TYPES
>LX
#HEAD WARMING
>ON