User`s guide

3-35

Operation panel of menu operation

q Explanation of each menu operation

- With [DURING PRNT2] mode, cleaning is executed during printing. Splices

are matched better than [DURING PRNT]. But, colors at before and after the

splice may change. Select the mode suitable for media characteristics and

print image.

- When [DURING PRNT] is selected, if [TUR MODE](

P.3-28) of take-up is

set to [TENSION](

P.3-28) , the same operation as [START & END] mode is

performed.

(27) BACK ADJUST VAL

Set the back adjust value of the media.

The splice line of two images divided

by performing the auto cleaning (PH

CLEANING [DURING PRNT] during

printing is corrected.

+/– 2000 pulses (Unit : about 3.5 μm)

(28) ADVANCE PREF

Select the ADVANCE PREFERENCE of MEDIA

ADVANCE VALUE.

SOFTWARE Data (value) sent from RIP of computer is the controlling

source.

FRONT PANEL The value set in the MEDIA REG MENU (or M.ADV MENU) of

printer is the controlling source.

#BACK ADJUST VAL

>XX:+0000PULSE

XX : Selected media number

Half way on the path

Cleaning

Correct with the

back adjust value.

Cleaning

#ADVANCE PREF

>XX:SOFTWARE

XX : Selected media number