User`s guide

3-22
¢ Preset media initial value
A maximum 20 types (media No. 01 to 20) medias can be saved.
A saved media can be also deleted. However, the media No. 01 (PAPER) cannot
be deleted. The initial values are shown below.
Media number
Setting
01 02 03 04 05
Media PAPER Glossy Matte Banner BLT_B
MEDIA ADV VALUE 100.00 % 100.00 % 100.00 % 100.00 % 100.00 %
DRY TIME VALUE 00 sec 00 sec 00 sec 00 sec 00 sec
PRINT MODE NORMAL1 NORMAL1 NORMAL1 NORMAL1 NORMAL1
PRINT DIRECTION BIDIR BIDIR BIDIR BIDIR BIDIR
FLATTEN TIME NONE NONE NONE NONE NONE
EDGE GUARD YES YES YES YES YES
MEDIA ADV MODE FWD ONLY FWD ONLY FWD ONLY FWD ONLY FWD ONLY
TUR MODE LOOSE LOOSE LOOSE LOOSE LOOSE
LEADING EDGE NORMAL NORMAL NORMAL NORMAL NORMAL
VACUUM LEVEL NORMAL NORMAL NORMAL NORMAL NORMAL
FRONT HEATER T **(OFF) 45˚C 45˚C 45˚C 45˚C
PRINT HEATER T **(OFF) 40˚C 40˚C 40˚C 40˚C
REAR HEATER T **(OFF) 45˚C 45˚C 45˚C 45˚C
COLOR STRIPE ON ON ON ON ON
IMAGE GRADIENT NORMAL NORMAL NORMAL NORMAL NORMAL
PH HEIGHT VAL NORMAL NORMAL NORMAL NORMAL NORMAL
BIDIR ADJ1 (L) 00 00 00 00 00
BIDIR ADJ1 (R) 00 00 00 00 00
BIDIR ADJ2 (L) 00 00 00 00 00
BIDIR ADJ2 (R) 00 00 00 00 00
BIDIR ADJ3 (L) 00 00 00 00 00
BIDIR ADJ3 (R) 00 00 00 00 00
IMAGE IMPROVE LOW LOW LOW LOW LOW
PH CLEANING START & END START & END START & END START & END START & END
BACK ADJUST VAL +0000PULSE +0000PULSE +0000PULSE +0000PULSE +0000PULSE
ADVANCE PREF SOFTWARE SOFTWARE SOFTWARE SOFTWARE SOFTWARE
PRINT MODE PREF SOFTWARE SOFTWARE SOFTWARE SOFTWARE SOFTWARE
HEATER PREF SOFTWARE SOFTWARE SOFTWARE SOFTWARE SOFTWARE
PH REST PERIOD 0000CYCLES 0000CYCLES 0000CYCLES 0000CYCLES 0000CYCLES
PH REST TIME 10sec 10sec 10sec 10sec 10sec
PH TEMP REST OFF OFF OFF OFF OFF