User`s guide

v
Use the power supply voltage specified on the nameplate. DO NOT
plug several devices into a single electrical outlet as this might result in
fire or electric shock.
Make sure the dryer is well grounded. If not, a short circuit may cause
fire or electrical shock.
DO NOT disassemble or remodel the dryer. DO NOT repair the dryer
by yourself. Doing so may cause fire, electric shock or other accidents.
DO NOT damage, break, process, or heat the power cable. Using a
damaged power cable may cause fire or electric shock.
NEVER use the dryer in a place of extreme humidity or any place where
it can possibly be splashed by any liquids. If any liquids get into the
dryer, it could lead to fire, electric shock, or other serious accidents.
DO NOT remove the covers attached to the dryer because they contain
high-voltage and extremely hot parts. Careless removal might result in
an electric shock or burn.
DO NOT allow metal or liquids to touch the internal parts of the dryer.
Doing so may cause fire, electric shock, or other accidents.
DO NOT disconnect or connect the power cable with wet hands. Doing
so may lead to electric shock.
Turn the dryer off and unplug the power cable immediately after and
during an electric storm.
WARNING