User`s guide

2-3 Pluging the Power Cord and Turning ON/OFF the Dryer

Plug the power cord of the dryer into the inlet after installing the dryer in the printer.

Follow the procedures below.

1. (○)Verify that the breaker switch of the dryer is turned off , and plug

one edge of the power cord into the inlet matched with the

specifications.

2. (│)Turn on the breaker switch of the dryer.

NOTE

The power specifications of the dryer are shown below.

-Power voltage: 230 VAC ± 10 %

-Power frequency: 50 Hz ± 1 Hz

- Grounding: D class grounding (The 3rd class grounding)

Always use power supply matched with the power specifications.

Breaker Switch

Power Cord