User`s guide
2-41
2
Basic operation
Media installation and removal
Adjusting the print head position [ADJUST PH POS]
This function adjusts each print head’s position in the scanning direction, media right to
left direction, based on the K print head position. Input the correction value based on the
print of [ADJUST PH POS].
STEP1 Print the test pattern for [ADJUST PH POS]
1
Set the printer to the oine state.
(Press the
ONLINE
key.)
INK MEDIA REG
MEDIA M.ADV
2
Press the
MENU
key twice to
display the menu group that
includes ADJUST.
PRINTER SETUP
ADJUST HEATER
3
Press the key and the key
to display NOZZLE PRINTS.
#NOZZLE PRINTS
NOZZLE PRINT
*
4
Press the key to select ADJUST
PH POS, and press the
key.
#NOZZLE PRINTS
ADJUST PH POS
*
5
Confirm that the NOZZLE PRINTS
are ready.
#NOZZLE PRINTS
* OK?