User`s guide

2-29
2
Basic operation

Media installation and removal
6
Select roll media or cut-sheet
media.
ROLL/SHEET:SHEET
SELECT MEDIA
ROLL/SHEET:ROLL
Either [roll] or [sheet] can be selected with the key or key.
Here, select [sheet] and press the key.
(To return to the media selection, press the
CANCEL
key.)
7
Select the type of media.
Select the registered type of
media with the and keys
and press the key. ( P.3-30
[MEDIA REG MENU])
MEDIA:TYPE02
SELECT MEDIA
MEDIA:TYPE02
To register new media
A message "NEW MEDIA ENTRY"
is displayed at the end of the
registered media.
Press the key to enter MEDIA
REG MENU.
The media registration procedure is
the same as the registration from the
registration menu.
( P.3-30 [MEDIA REG MENU])
Press the key to return from
the media registration menu to the
media type selection menu.
To return to the value before input,
press the
CANCEL
key.
MEDIA:XXXX
SELECT MEDIA
MEDIA:TYPE02
(The registered media is displayed.)
SELECT MEDIA
NEW MEDIA ENTRY
(Enter the media registration menu.)
8
The media set operation starts
automatically.
PREPARING MEDIA
PLEASE WAIT
When the media set operation is successfully completed, the printer returns to the
online or oine state.
If the media set operation is not completed, an error message appears. Retry the
procedure beginning with step
1
.
–
–
Note
After installing the media, check whether the media on the platen has no oat or
wrinkles.
–