User`s guide

2-13
2
Basic operation

Media installation and removal
14
Select roll media or cut-sheet
media.
ROLL/SHEET:SHEET
SELECT MEDIA
ROLL/SHEET:ROLL
Either [roll] or [sheet] can be selected with the key or key.
Here, select [roll] and press the key.
(To return to the media selection, press the
CANCEL
key.)
15
Select the type of media.
Select the registered type of
media with the and keys
and press the key. ( P.3-30
[MEDIA REG MENU])
MEDIA:TYPE02
SELECT MEDIA
MEDIA:TYPE02
To register new media
[NEW MEDIA ENTRY] is displayed at
the end of the registered media.
Press the key to enter MEDIA
REG MENU.
The media registration procedure is
the same as the registration from the
registration menu.
(
P.3-30 [MEDIA REG MENU])
Press the key to return from
the media registration menu to the
media type selection menu.
To return to the value before input,
press the
CANCEL
key.
MEDIA:TYPE02
SELECT MEDIA
MEDIA:TYPE02
(The registered media is displayed.)
SELECT MEDIA
NEW MEDIA ENTRY
(Enter the media registration menu.)
16
Enter the remaining media.
Enter the remaining roll media loaded on
the printer. ( P.3-28 [MEDIA MENU])
SET REMAINING MEDIA
*XXXm
Note
After installing the media, check whether the media on the platen has no oat or
wrinkles.
–