User`s guide

2-5
2
Basic operation

Power ON/OFF procedure
3
Turn on the power switch on the operation panel.
OK
MENU ONLINE
HEATER CANCEL
Power ON/OFF
switch
When the power switch is turned on, the printer performs the power-on self-
diagnostic test and displays the following message on the operation panel.
Booting up...
INITIALIZING...
PLEASE WAIT
PRINTER READY
ROLL:1625/PAPER
Note
Except for emergency, turn o the power while a message "PRINTER READY" is
displayed. If the power is turned o unnecessarily when the printer is performing
"INITIALIZING..."or "CLEANING," the ink may drip or the print head may be
damaged or saved parameters may be lost.
–
If the POWER LED on the operation panel does not light even when the Printer and
Heater power switches at the rear of the printer and the power ON/OFF switch on the
operation panel are turned on, the power supply has a problem.
When an abnormality is detected during the power-on self-diagnostic test, an error
message appears on the LCD.
Take appropriate measures referring to [Section 5 Getting troubled].
–
–