User`s guide

5-16
How to get good image quality
This section describes the hint for you How to get good image quality with the printer.
Take appropriate actions according to the state of prints.
Note
When several actions are described, they are arranged in the order of
eectiveness. Therefore, it is recommended that you take actions from the top
and conrm the eect on the improvement. (Note that all the described actions
are not always necessary to solve the problem.)
–
The print is light.
Cause Action

The operating environment is
outside the specication of the
printer.
Raise the ambient temperature to more than 15°C (20 to 25°
C recommended) to warm the printer adequately.

Media is not selected properly. Check the media selection. ( P.3-34)
White stripes appear on the print.
[Cause]
Improper media feed
adjustment
[HINT]
White stripes appear
in all colors when
color stripes are
attached.
[HINT]
White stripes appear
in some colors when
color stripes are
attached.
Basic image [Cause]
Nozzle-out of the print
head
[Cause]
Mismatch between ink
and media/Fast ink
drying