User`s guide
5-8
When the Error LED lights up, check the message displayed on the LCD rst.
Error messages are classied into the following two groups.
Service call errors:
Errors that the operator (customer) cannot handle, such as hardware/software failures.
Contact our service depot.
Operator call errors:
Errors that the operator (customer) can handle.
Take actions following the message.
Messages shown below are error messages.
Take appropriate actions according to the error message displayed on the LCD.
Service call errors
When the following service call error appears, reboot the printer by turning off and on
the following.
Operation panel’s power switch
Rear panel’s printer power switch
Rear panel’s heater power switch
The error is reset in some cases.
–
–
–
–
Note
Wait for one minute after the power switch is turned o at the service call error,
and then turn on the power switch again.
–
(System error)
SYSTEM ERROR nnnn
POWER OFF/ON
nnnn: Error code
Meaning An unrecoverable error occurred.
Action Contact the sales dealer or our service depot nearest to you, and inform them of
the displayed error code.
When an error message is displayed