User`s guide

5-6
Remove a media jam using the following procedure according to the displayed guidance
message.
1
The following guidance message appears.
WARNING! (X)
CLEAR MEDIA JAM
X: Media jam type
0: Media jam 0
A jam on the media feed path is invalidating the printer's normal operation.
1: Media jam 1
A jam on the carriage is invalidating the printer's normal operation.
2: Media jam 2
The media was not detected correctly because:
- Roll media or cut-sheet media was selected incorrectly.
- The length of the applied cut-sheet media is not as prescribed.
2
Release the pressure roller with the pressure control knob, and
then open the front cover.
Takeup side Supply side
or
Pressure control knobs
OPEN COVER
REMOVE MEDIA
If the carriage must be moved manually, slide the carriage by softly pressing
the arrowed part.
How to clear media jams