User`s guide

5-4
Blank sheet appears.
Inspection/check item Action
Print data Check the current print data to see if blank sheet data is
sent.
Media jam occurs frequently.
Inspection/check item Action
Media type Check whether the set media type matches the media
type setting. (
P.3-28 "MEDIA MENU")
Media installation Install the media properly. ( P.2-7 "Media installation
and removal")
Foreign matter in the carriage path Remove the foreign matter, if any. ( P.5-6 "How to
clear media jams")
Foreign matter in the media feed
path
Remove the foreign matter, if any. ( P.5-6 "How to
clear media jams")
Suction fan power If the suction fan power is not best set, reduce the power.
(
P.3-36 "SUCTION FAN LEVEL")
Heater temperature setting If the heater temperature is not best set, lower the heater
temperature. (
P.2-101 "Changing temperature
using the heater control menu")
Print speed is low.
Inspection/check item Action
High-temperature environment If the printer temperature is higher than 40°C, the
printer prints media at a lower printing speed. Set the
atmospheric temperature to 20 to 25°C (recommended
temperature) and leave the printer for at least one hour,
and then start printing.
USB transfer speed Check the USB transfer speed. When the USB connection
is made at the full speed, change the host computer
connection conguration to high-speed USB connection
to increase the printing speed.