User`s guide

4-8
12
Select the media side to be
supplied.
Select "BACK" with the or key. You
can change the setting with the key.
If you press the
CANCEL
key, the setting
remains unchanged.
SELECT MEDIA
ROLL/SHEET:BACK
13
Select a media type.
Select the media type with the or
key. You can change the setting with the
key. If you press the
CANCEL
key,
the setting remains unchanged.
SELECT MEDIA
MEDIA:PAPER
14
Conrm slack of supply side.
If the media slack is insucient, the
printer does not proceed to the next
operation.
–
CHECK
SLACKEN MEDIA
15
The media setting operation starts
automatically.
When the media setting is successfully
completed, the printer returns to the
online or oine state.
If the media setting is not completed,
an error message appears. Retry the
procedure from step 8.
–
–
PREPARING MEDIA
PLEASE WAIT
Note
Before starting 2nd-side printing, change the settings of "SUCTION FAN LEVEL"
and "MEDIA ADV MODE" from the operation panel according to the media to be
used. For media that is easy to adhere, set "SUCTION FAN LEVEL" to "LOW" and
"SUCTION FAN LEVEL" to "BACK & FWD1 or BACK & FWD2."
–
The print head should be cleaned before starting 2nd-side printing.–