User`s guide

4-7
4
Print mode and special printing

Double-sided printing
10
Use the supply-side feed switch (black) to create a slack inside
the peel roller. Put the supply-side tension bar on the slack of
the media at the supply side.
( P.2-7 "Roll media installation
procedure" step 18)
Peel roller
Scroller
<Media in general>
Tension bar (with a  ange)
Printer rear (supply side)
Peel roller
Tension bar
11
Set the media edge guards and
close the front cover.
CLOSE COVER
CHECK EDGE GUARD
*OK?