User`s guide

3-54
ADJUST MENU
This menu is used to set mechanical adjustment parameters. Press the key to enable
the setting of mechanical adjustment parameters.

PRINTER SETUP


ADJUST HEATER

#TEST PRINTS
>NOZZLE PRINT
(1) Adjustment pattern
Used to print the adjustment pattern that is used
for mechanical and electrical adjustments.
To stop printing, press the
CANCEL
key.
#TEST PRINTS
>NOZZLE PRINT
<Parameter (choice input)>
NOZZLE PRINT Print the nozzle check pattern.
ADJUSTMENT & CHECK Print the adjustment check pattern.
PH TO PH Print the head position adjustment pattern.
PH R&L ADJ PRINT Print the head right and left adjustment pattern.
BIDIR ADJ PRINT2 Print the bidirectional adjustment pattern (for NORMAL1, NORMAL2,
QUALITY, and DENSITY).
BIDIR ADJ PRINT3 Print the bidirectional adjustment pattern (for DRAFT1).
BIDIR ADJ PRINT4 Print the bidirectional adjustment pattern (for FINE DRAFT).
EDGE SENSOR ADJ PRINT Print the edge sensor adjustment pattern.