User`s guide

3-52

(4) WIPER BLADE REP

Used to replace the wiper blade.

( P.2-90 [Replacing the wiper blade])

#REPLACE WIPER BLADE

(5) HEAD CHECK

Used to check the print head.

( P.2-108 [Periodic maintenance])

#RESEAT PRINTHEAD

(6) WASH PRINTHEADS

To prevent the nozzle from clogging, this function

is provided to ll the cap with ink so that the print

head (nozzle surface) is soaked in the ink. Leave the

printer for 1 to 2 hours and check again.

If nozzle-out is not rectied even after cleaning is

repeated, use this function.

#WASH PRINTHEADS

None

Note

When printing after the fillcap operation, be sure to perform PH.REC MENU

(NORMAL ALL).

If nozzle-out still occurs even after the printer is left for 24 hours, contact our

service depot.

–