User`s guide

3-51
3
Menu of operation panel

Explanation of each menu operation
(2) INK SYSTEM OPT
Execute the service (cleaning) operation.
#INK SYSTEM OPT
>STORE INK SYS
<Parameter (choice input)>
STORE INK SYS Used to clean the print head and ink ow path with the cleaning liquid and
charge the cleaning liquid so that the printer can be left for a long time
period with the wiper cleaning liquid charged.
CLEAN INK SYS Used to extract the storage liquid and clean the print head and ink ow path
with the cleaning liquid to make the printer operable after STORE INK SYS is
performed. (After this cleaning, ink must be charged.)
INITIAL CHARGE Used to charge ink in the printer.
CHARGE(INKPACK) To be used in order to ll the ink after head wash
CHARGE CAP CL Used to solve the nozzle out by charging wiper cleaning liquid to the
cap, after conrming that the nozzle out was not solved by several head
cleanings.
The operation to charge the wiper cleaning liquid to the cap is peformed
manually with the procedure below:
(a) Select the operation
from the operation panel.
(b) Move the carriage.
(c) Open the front cover.
(d) Manually move the carriage.
(e) Add the wiper cleaning liquid to the cap with dropper.
(f) Close the front cover.
(g) Return the carriage to the original position.
(h) Hold the printer for several seconds.
(i) Perform the cleaning.
PH CLEANING To be used when cleaning any ink adhered to the head nozzle surface using
a linear jig soaked with cleaning agent.
(3) COLOR CHANGE
Used to change the printer mode from 8-color
mode to 4-color mode or from 4-color mode to
8-color mode.
( P.2-67 [8-color to 4-color mode change
procedure] or P.2-75 [4-color to 8-color mode
change procedure])
#COLOR CHANGE (8->4)
>
#COLOR CHANGE (4->8)
>