User`s guide

3-48

(2) MEDIA ADV VALUE

Adjust the media advance value. Enter a media

advance value based on the media advance

correction pattern print result.

#MEDIA ADV VALUE

#XXXXXX >099.81%

XXXXXX: Media name

97.00 to 106.00% Media advance correction value setting range

(3) BACK ADJUST PRINT

When making the media back adjustment (when

PH CLEANING [DURING PRINT] is selected), print

the media back correction pattern. Select the

parameters to meet the respective print mode.

#BACK ADJ PRINT

>NORMAL

NORMAL1 Selected when adjusting in the NORMAL1 or DENSITY2 print mode.

QUALITY Selected when adjusting in the QUALITY or DENSITY2 print mode.

DRAFT1 Selected when adjusting in the DRAFT1 print mode.

FINE DRAFT Selected when adjusting in the FINE DRAFT print mode.

NORMAL2 Selected when adjusting in the NORMAL2 print mode.

(4) BACK ADJUST VAL

Set the back adjust value of the media. Enter

a media back value based on the media back

correction pattern print result.

#BACK ADJ VAL

#XXXXXX>+0000P

XXXXXX: Media name

±2000 pulses (Unit: Approx. 2.5 μm)

Note

The back adjust value of the media is valid when DURING PRINT is set for PH

CLEANING. (

P.3-39 [(14) PH CLEANING])

–