User`s guide

3-42

(20) BIDIR VALUE4

The reciprocating correction adjusts the shift

between two ways of bidirectional print.

With this menu, correction values for print mode

(FINE DRAFT1) are set.

#BIDIR ADJ4 L CCC

>01:+00

CCC: Ink color/location

Display order:

8-color mode: Y1

 Lm2  C3  Gy4  K5  Lc6  M7  Lg8

4-color mode: Y1

 M2  C3  K4  K5  C6  M7  Y8

±, -32 to +31

Note

For how to set the reciprocating correction value, refer to [Setting media advance

correction values] (

P.2-38).

–

(21) SET REMAINING MEDIA

Set the remaining media. When the remaining

media is set beforehand, you can check the

remaining media (by subtracting the printed

length) in the MEDIA MENU. When [***] is

displayed due to invalid entry, the remaining

media management is not performed.

>XX:YYYYft

#REMAINING MEDIA

>XX:YYYm

XX: Selected media number

YY: Remaining media

0 to 999m The input unit of the meter unit system is meter (m).

0 to 3278ft The input unit of the inch unit system is feet (ft).

The parameter display unit is displayed with the unit set in [LENGTH UNITS] of SETUP

MENU.

–