User`s guide

3-38

(12) PH HEIGHT ADJ

Adjust the print head height.

#PH HEIGHT VAL

>XX:+0.0

XX: Selected media number

-5 to +10 (Unit: 0.1 mm)

(13) PRINT QUALITY MODE

Select whether to automatically correct the print

quality or not.

#IMAGE IMPROVE.

>XX:ON

XX: Selected media number

ON Automatic correction is performed. (Usually, set to ON.)

OFF Automatic correction is not performed.

Note

If a part (characters or halftone) of an image is disturbed due to excessive

automatic correction, set this mode to OFF and be sure to adjust the media

advance correction value.

–