User`s guide

3-37
3
Menu of operation panel

Explanation of each menu operation
(10) PREHEATER INIT
Set the preheater temperature. However, when “**”
is set, the preheater does not work.
(When temperature unit is Centigrade)
#PREHEATER T
>01:40°C
(When temperature unit is Fahrenheit)
#PREHEATER T
>01:104°F
<Parameter (numeric input)>
15°C to 55°C Centigrade temperature setting range
59°F to 131°F Fahrenheit temperature setting range
Switching the display between Centigrade temperature and Fahrenheit temperature is
performed with (4) Temperature Unit in SETUP MENU. ( P.3-59)
Centigrade/Fahrenheit conversion formula
F=(9/5)C+32
C=(5/9)(F-32)
–
(11) COLOR STRIPE
Select whether to print color stripes or not.
#COLOR STRIPE
>XX:ON
XX: Selected media number
<Parameter (choice input)>
ON Color stripes are added.
OFF No color stripe is added.
If no color stripe is added, nozzle-out may occur. It is recommended that media be
printed with color stripes.
Regardless of this setting, color stripes are added to various adjustment patterns in the
offline state.
When COLOR STRIPE is set to ON, the print area is reduced by about 20 mm.
–
–
–