User`s guide

3-33
3
Menu of operation panel

Explanation of each menu operation
 How to set parameters
The parameter setting procedure is described using an example of entering MEDIA
ADVANCE VALUE ( P.3-34) in media number [02].
1
In the MEDIA REG MENU, display
[#MEDIA ADV VALUE] with the
or
key.
#MEDIA ADV VALUE
>02:100.00%
2
Press the key to change
the parameter, and correct the
parameter.
#MEDIA ADV VALUE
*02:099.80%
Note
Print the advance adjustment pattern and determine the MEDIA ADVANCE VALUE.
(
P.3-47)
–
3
Press the key. Then the
message is displayed.
#MEDIA ADV VALUE
*02:OK?
(This message is displayed only when a media advance value is newly registered.)
4
Newly register the media number
02 with the
key. A “ * ” mark
(indicating registered media)
appears at the end of the LCD
screen, and the printer returns to
the state of step
1 .
#MEDIA ADV VALUE
*02:099.80% *
When the media is already
registered, a “ * ” mark is displayed.
To cancel the registration, press the
CANCEL
key. Then the new registration
stops and the printer returns to the state of step 1 .