User`s guide

3-29
3
Menu of operation panel

Explanation of each menu operation
<Double-sided printing>
FACE(XXXXXX)
YYYYmm
BACK(XXXXXX)
YYYYmm
X: Media type
Y: Media size
X: Media type
Y: Media size
(1) When the
CANCEL
and keys are pressed, the display stops scrolling and returns to
the top menu in the oine state.
(2) When the
ONLINE
key is pressed, the display stops scrolling and goes to the online state.
(3) While the media menu is displayed, the media feed switch and the take-up reel switch of
both roll feed unit and take-up reel unit are enabled even when the media is pressed by the
pressure control knob.
<Display at Nest function ON>
(In case of display in mm)
YY"
NEST(XXXXXX)
YYYYmm
(In case of display in inch)
XXXXXX: Media name
YYYY: Media width
The display is switched at intervals of 3 seconds.
(In case of display in mm)
ZZZZft
REMAINING MEDIA
ZZZm
(In case of display in inch)
ZZZ: Remaining media
(1) REMAINING MEDIA shows the amount of remaining media. When “**” is entered for the
value of remaining media, “**” is displayed.
(2) When the
CANCEL
and keys are pressed, the display returns to the oine state (menu
mode).
(3) When the
ONLINE
key is pressed, the display goes to the online state (idle mode).