User`s guide

3-8
(3) Changing media advance correction value during online printing
During online printing, the media advance correction value can be changed in the
following procedure.
1 Press the or key while “PRINTING” is displayed.
PRINTING
ROLL:104 / PAPER
The printer starts receiving data.
The Data LED blinks.
2 The media advance correction value that is currently active is displayed.
Change the value with the
or key.
MEDIA ADV:099.80%
0.99.80%
*
Settable range: 97.00% to 106.00%
The value at the start of printing is displayed at the right
of the first line on the LCD and remains unchanged until
printing is nished. However, if cleaning is performed during
cleaning mode 2, the value changed halfway is displayed
after cleaning.
The value is incremented or decremented by 0.01%
with the or key.
When the value is changed, it is reflected in printing
immediately.
The changed value is registered and retained.
If there is no key operation for three seconds, the
display returns to the previous state.
–
–
–
–