User`s guide

3-2
This section describes how to read LCD display and state of the printer.
How to read LCD display
(1) Initialization state display
This display shows that the initialization is in
progress at the startup of the printer.
When the printer starts up normally, the
printer automatically enters the online idle
mode.
–
Booting up...
INITIALIZING...
PLEASE WAIT
(2) Online state (idle mode) display
This display shows that the printer is ready to
receive data from the computer. (The ONLINE LED
is ON.)
When the key is pressed in the idle
mode, the printer can go to PH.REC MENU.
For the display of media width, either meter
unit system or inch unit system can be
selected by the setting of [Length Unit] (
P.3-58) of the system menu.
–
–
Media name:PAPER
Media of 1625 mm (64 inches) width
Roll media is set
PRINTER READY
ROLL: 1625 / PAPER
(3) Online state (printing mode) display
This display shows that the printer is printing data.
PRINTING
ROLL: 1625 / PAPER
(4) Online state (scan standby) display
This display shows that the scan of the print head
is in the standby state for reasons such as data
printing, warmup or waiting for data transfer.
RESTING
ROLL: 1625 / PAPER
LCD display and state of the printer