User`s guide

2-109
2
Basic operation

Periodic maintenance
Daily inspection and maintenance
To maintain stable print quality, carry out the following nine items everyday.
(1) Check the wiper blade for contamination.
(2) Replenish wiper cleaning liquid.
(3) Clean the capping unit.
(4) Replenish the spittoon absorber liquid.
(5) Check the waste ink bottle.
(6) Clean the carriage.
(7) Clean the media edge guard.
(8) Perform normal cleaning.
(9) Perform nozzle print.
Note
Carry out these items everyday.
Be sure to use the cleaning liquid and cleaning swabs specied by us.
–
–
< Checking the wiper blade for contamination>
Visually check the wiper blade for contamination and scratches.
If the wiper blade is scratched, replace it. ( P.2-90 [Replacing the wiper blade])
1
Open the front cover, and then open the wipe cover.
2
Visually check the wiper blade for
contamination and scratches.
Wiper blade
Wiper blade
Note
Check the level of the remaining wiper cleaning liquid. If small amount of wiper
cleaning liquid is remaining, replenish it. (
P.2-110 [Replenishing wiper
cleaning liquid])
–
3
Close the wipe cover and the front cover.