User`s guide

2-106
The printer automatically adjusts the head height to the best height when the printer is
turned on or when media is set. To adjust the head height according to the media to be
used, select MEDIA REG MENU on the operation panel and adjust the head height.
Note
Adjust the head height so that the head does not contact with the media. Friction
of the head may cause poor ring of the head and degrade the print quality. On
the other hand, excessive head height from the media will also degrade the print
quality. Use the printer with the head height that is automatically adjusted by the
printer.
–
1
Set the printer to the oine state.
Press the
ONLINE
key.

INK MEDIA REG


MEDIA M.ADV

2
Press the key to display the
MEDIA REG MENU.
#SELECT MEDIA
>01:TYPE01
3
Press the key and then or
key to display [PH HEIGHT VAL].
#PH HEIGHT VAL
>01:+0.0mm
4
Press the key, and enter the
head height adjustment value with
the
or key.
The adjustment value range is: -0.3 to +1.0
mm.
#PH HEIGHT VAL
>01:+1.0mm
5
Press the key to determine the
adjustment value.
How to use the head up/down mechanism