User`s guide

2-102
 Key operation in the heater control menu
and keys Select a heater for which temperature is to be set.
and keys Set the heater temperature.
MENU
key Selects heater ON or OFF.
key
When this key is pressed for 1.5 seconds while the heater control menu
is displayed, all the heaters are forcibly turned on even without print
operation. (The heating control starts.)
CANCEL
key
Pressing this key for 1.5 seconds with the heater control menu displayed
cancels the heater-on state made forcibly by the key. (The heating
control stops.)
 To nish displaying the heater control menu
Press the
HEATER
key while the heater control menu is displayed.
Even if heater temperature is changed in the heater control menu, the initial temperature
value of each heater stored in MEDIA REG MENU remains unchanged.
When the temperature unit in SETUP MENU is set to Fahrenheit, every temperature is
displayed in Fahrenheit.
–
–
 When the heater control menu display nishes automatically
HEATER DISPLAY END
If there is no key input for 30 seconds while the heater control menu is displayed, a
message "HEATER DISPLAY END" appears automatically for two seconds and then the
heater control menu display finishes. While this message is displayed, no key input is
disabled.