User`s guide

2-94
A set of tension bars for the supply side includes the following parts. Use suitable ones
depending on the width and type of the media.
L size (48 inches) (123 cm): 1 piece
M size (24 inches) (61 cm): 1 piece
S size (16 inches) (41 cm): 2 pieces
 Coupling tension bars (supply side)
Tension bars can be connected to each other by screwing. The length of these four
tension bars is 104 inches when connected. The L-size tension bar whose both ends
are convex is always used. M-size and S-size tension bars whose one end is concave are
coupled with the L-size tension bar.
In case of vinyl chloride media, use only one S size tension bar (16 inches) (about
41cm).
–
Adjusting tension bar length