User`s guide

2-93
2
Basic operation

Replacing the wiper blade
8
Press the key to enter the
[ADJUST] menu.
#EDGE SENSOR ADJ VAL
>±Y.Ymm
9
Press the key to display the
[EDGE SENSOR ADJ VAL] menu,
and press the
key.
10
Based on the printed sensor
adjustment pattern, enter the
correction value of the edge
sensor position.
#EDGE SENSOR ADJ VAL
>±Y.Ymm
11
Press the key to decide the
entered value.
#EDGE SENSOR ADJ VAL
>+0.0mm
12
Press the key to return to the
higher-level menu.
To obtain the correction value:
Obtain the correction value by measuring the margin setting the reference value
to 15 mm.
<Example>
The margin is 14 mm: The correction value is -1.0 mm.
The margin is 16 mm: The correction value is +1.0 mm.