User`s guide

2-91

Basic operation



Replacing the wiper blade

Nip the rubber of the new wiper blade with the tweezers and

insert it straight downward, and install it by hooking the hole in

the rubber to the plastic projection.

Rubber part

Note

When handling the wiper blade, do not

touch its upper part by hand or nip it with

tweezers because the upper part directly

contacts with the print head.

–

Upper part

Close the wipe cover and front

cover.

#REPLACE FINISHED

*NO

Select [* YES] and press the

key to nish the replacement.

#REPLACE FINISHED

*YES

Note

The printer automatically adds up the usage time period of the wiper blade and

displays a message prompting you to replace the wiper blade. On the premise

that a new wiper blade is installed and [*YES] is set, the accumulator calculates

the usage time period. (When [*YES] is set, the value of accumulator is reset.) If

this premise is ignored, the time for replacement is erroneously detected.

Replace the all eight wiper blades at a time. If they are replaced partially, a wrong

replacement message may appear.

–