User`s guide

2-88
Procedure when the waste ink bottle becomes full
Note
Replace the waste ink bottle carefully not to bump your head on the printer
upper part.
–
1
Slide the lever up and lift the whole cap.
Tube
Lever
Waste ink bottle
2
The ink drips from the tube. Leave it for a while.
3
Remove the full waste ink bottle from the unit paying attention
not to spill the waste ink. Then cap it and replace it with a new one.
4
Wipe o the spill ink in the waste ink bottle unit.
5
Slide the lever up and install a new waste ink bottle.
6
Lower the lever.
Tube
Lever
Waste ink bottle
Note
Do not hit the external cover's upper part, or the waste ink may spill.–