User`s guide

2-67
2
Basic operation
Ink pack installation and replacement
8-color to 4-color mode change procedure
The procedure to change 8-color mode to 4-color mode is classied into four actions as
follow.
(1) Replace the four subcartridges with four dummy subcartridges.
(2) Remove the four ink trays and perform the cleaning twice.
(3) Set the 4-color mode's ink packs.
(4) Replace the four dummy subcartridges with the four subcartridges.
The detailed procedure is described below.
Note
If 8-color data is received during the 4-color mode, an error is notied at the host
computer side. Print operation is disabled.
To change the color mode to the 4-color mode, purchase the optional color replacement
set. If you do not have two subcartridges for each color (Y/M/C/K), purchase the
additional subcartridges from your dealer.
(1) Replace the four subcartridges with four dummy subcartridges.
1
Execute the 8-color to 4-color mode
change from the operation panel.
#COLOR CHANGE (8->4)
>
2
Loosen the two knob screws on the subcartridge cover and open
the subcartridge cover.
Subcartridge cover
Knob screws
OPEN
SUBCARTRIDGE COVER