user manual

6
TROUBLESHOOTING
56
English
6
TROUBLESHOOTING
57
English
※ If no operation is performed for more than 1 minute or when Button A is pressed once, the watch returns to the time display mode.
When the watch has returned to the time display mode, restart operation.
Press Button B or C
to adjust the indicator
hand as shown in the
fi gure
4
Adjust the indicator hand
to the position as shown
in the fi gure.
※
If the indicator hand points
as shown in the fi gure, go
to operation of ⑤.
To move the
hand counter-
clockwise
To move
the hand
clockwise
※ The indicator hand makes
one complete turn, but this
does not mean a failure.
If the button is kept pressed
for 2 seconds or longer, the
hand will move continuously.
Press the button again to
stop the hand.
In case of an abnormal movement (resetting the built-in IC)
Pull out the crown
to the second click
Continue to press Button
A and C simultaneously
for 2 sec, and then release
them
When the hands stop
at 00:00:00, push
the crown back in
2
34
The second hand moves
from 00:00:00.
When the buttons are
released, the second
hand makes one
complete turn, and stops
at the 0-sec position.
After that, the hour/
minute hands move and
stops at 00:00.
※ After the system reset,
the time zone is set to
UTC/LON.
※ Lock the
crown.
In the case that the watch
moves abnormally or that
the watch does not move at
1-sec intervals even after
fully charging the battery,
perform the procedures from
① to ⑨ to re-establish normal
function.
The second hand stops at
the 13-sec position.
The watch can be recovered
to the initial state by the
system reset when trouble
occurs. (② ∼ ④ )
After that, adjust the
preliminary position of the
date and indicator hand ( ⑤
∼ ⑨ ) and set the time ( ⑩ )
before use.
Unlock the crown
1
Unlock the crown
Unscrew
While pressing the crown in
Screw
Press
for
2 sec
Press
for
2 sec
Push
back
in
01 2
012
Pull out
the crown
to the
second click
Reset the system ( ② ∼ ④ )
Continued on the following page
When operation is
completed, press
Button A and release
it
The mode to adjust the
preliminary position is
completed, and the second
hand and the hour/minute
hands start moving.
Press
7
Press Button B once
and then release it
The hour/minute hands
move, and stop at “00:00
am.”
Press
6
Continue to press Button A
(2 seconds) and release it
when the second hand
moves to the 0-second
position.
The watch enters the
mode to adjust the
preliminary position of the
hour/minute hands.
Press
for
2 sec
5
※It the watch displays
the precise time, go to
operation of ⑦.