user manual

6
TROUBLESHOOTING
52
English
6
TROUBLESHOOTING
53
English
Pull out the crown to the second click
Press Button B or Button C to set the date Push the crown back in
2
34
Operation has been completed.
※ When the watch
enters the manual
time setting mode,
the reception result
will be displayed
as “N,” since the
reception results data
will be lost.
※ The date will not
move by turning the
crown.
※ During movement of
the date, the buttons
cannot be operated.
When the date is not automatically changed under a condition in which the watch is unable to receive GPS
signals (when changing from months with 30 days or less to months with 31 days), set the date manually.
・ The date can be set independently regardless of the time.
・ When using the watch again under a condition in which the watch is able to receive GPS signals, receive
GPS signals to set the time and date.
※ When the date is not correct even when the watch has successfully received GPS signals, the preliminary position of the date may be misaligned.
The second hand
moves to the 13-sec
position and stops.
Unlock the crown
1
Unlock the crown
Unscrew
※ Lock the crown.
While pressing
the crown in
Screw
01 2
Pull out
to the
2nd click
Press
to return
1day
Press to
advance
1day
Push
back
in
012
When the button B is kept pressed for 2 seconds or longer, the date
will start to move continuously. Press the button B again to stop.
How to manually set the date How to manually set the time
5
※ Even if GPS signals cannot be received, the watch can be used with the same accuracy as a normal quartz watch. (at loss/gain ±15 se co nd s
per month on average)
※ If the watch receives GPS signals after manual time setting, it displays the received time.
Unlock the crown
1
Unlock the crown
Unscrew
Pull out the crown to the second click
2
The second hand moves to the 13-sec
position and stops.
012
Pull out
to the
2nd click
Continue to press Button A (3 sec) and then release it
when the hand moves to the 0-sec position
3
The second hand moves to
stop at the 0-sec position.
The watch enters the
manual time setting mode.
※ When the watch enters the manual
time setting mode, the reception
result will be displayed as “N,” since
the reception results data will be lost.
Press
for
3 sec
Press Button B or Button C to set the time
4
※ The hands will not move by turning
the crown.
※ The point in which the date changes is
at 0:00 AM (12:00 PM). Set the time
taking into consideration AM or PM.
Press
to set back
1 min
Press
to advance
1 min
When the button is kept pressed for 2
seconds or longer, the hour/ minute
hands will start to move continuously,
and when it is pressed again, they
stop moving.
Push the crown back (in simultaneously with a time signal)
Operation has been
completed.
Push
back
in
012
※ Lock the crown.
While pressing the crown in
Screw