Use and Care Manual

CUSTOMIZING TV SETTINGS

Initial Setup

• Connect the power cord to the power socket after you have completed all the

physical connections. At this stage, the TV will enter Standby Mode and the red

LED indicator will illuminate.

• In Standby Mode, press the

button on the main unit or on the remote control to

turn the TV on. The red LED indicator will turn blue.

• The first time you turn the TV on, it will go into the Setup Wizard. Press

buttons to select your desired mode and press OKtoconrm.

OK :Next

HDMI1

HDMI2

HDMI3

VGA

USB

Component/AV

OK :Next

Are you sure you want Home mode(Energy Saving)?

YES NO

Left and Right arrows

Home Mode (Energy Saving) is the default as-shipped television conguration and

settings. And Home Mode (Energy Saving) is the setting in which the

product qualies for ENERGY STAR. Any changes to default as-shipped television

configuration and settings would change the energy consumption. And enabling

certain optional features and functionalities may increase energy consumption

beyond the limits required for ENERGY STAR qualication, as applicable.

Retail Mode : Select Retail Mode if you would like your picture to be brighter. At

times this mode may use more energy to operate the Volume/Sound Mode and the

Picture Mode. In this setting, the power consumption may possibly exceed the limited

requirement of the ENERGY STAR qualication.

ENERGY STAR is a set of power-saving guidelines issued by the U.S.

Environmental Protection Agency(EPA).

ENERGY STAR is a joint program of the U.S. Environmental Protection Agency

and the U.S. Department of Energy helping us all save money and protect the

environment through energy efcient products and pratices.

• The ON-MODE Power under Home Mode should be less

than 42.6 W.

• The SLEEP-MODE Power should be less than 0.5 W.