LCD Television SE324FB
TABLE OF CONTENTS 1 I M P O R TA N T INFORMATION 2 2 PREFACE 4 3 SAFETY PRECAUTIONS 4 4 IN THE CARTON 6 5 FRONT/BACK CONNECTIONS OF LCD TV 7 6 7 8 9 10 TV INSTALLATI ON DRAWINGS REMOTE CONTROL MENU OPERATION Power Cord Connection 8 Antenna Connection 8 AV Connection 9 YPbPr (c omponent ) Connection 9 VGA ( PC ) Connection 10 COAXIAL Connection 10 HDMI Connection 11 Service Port Function 11 Remote control instructions 12 Remote control setup 14 Setup Wizard Select
IMPORTANT INFORMATION The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric to persons. The exclamation point within an equilateral triangle is interded to aler the user to the presence of important operating and maintenance (servicing) instruction the literature accompanying the appliance.
IMPORTANT INFORMATION Important Safety Instructions Note: 1.Read these instructions. 2.Keep these instructions. 3.Heed all warnings. 4.Follow all instructions. 5.Do not use near water. 6.Clean only with dry cloth. 7.Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
PREFACE 2. PREFACE Thank you for buying this TV! Please read this manual thoroughly before operating the TV. Make sure the TV was not damaged in transit. Should the TV be damaged, do not install it and contact your dealer. Check that you have all the accessories according to the model. 3. SAFETY PRECAUTIONS Put the TV on a stable surface. Do not place any material on the TV.
SAFETY PRECAUTIONS Keep the TV dry and away from humidity. Keep the TV away from heat sources . Unplug the TV before cleaning it. Do not use solvent or liquid to clean the TV. Only clean the TV with a soft and dry cloth. In case of troubleshooting, do not use spare parts other than those suggested by the manufacturer. Using inadequate spare parts can lead to electric shocks, short-circuits , fire or other incidents. Unplug the TV during lightning storms or when unused for long periods of time.
IN THE CARTON 4. IN THE CARTON MU TE P.MOD E PO WE R S.M ODE SL EE P MT S 1 2 3 4 5 6 7 8 9 - 0 CH . LI ST A AS PE CT B CC C D SOURCE ME NU OK EN TE R DISPLAY EX IT FAV + VO L AD D/ER AS E CH - LCD TV SET AU TO V-C HI P TV VG A CO MP HD MI Remote Control 1.5V 1.5V AAA Batteries Warranty Card LCD Television SE324FB Source Select TV AV AUTO CHANNEL SEARCH - Air YPbPr Now Searching ... Please Wait ...
FRONT/BACK CONNECTIONS OF LCD TV 5. FRONT/BACK CONNECTIONS OF LCD TV Front View 1 2 3 4 5 > < 1. Press“INPUT”to select the input source. 2. Press “MENU”to bring up the main menu on the screen. 3. Press“CH ”or “CH ”to scan through channels. 4. Press“VOL+”or “VOL-”to increase or decrease the volume. 5. Press“POWER” button to turn the TV on or off. 6. REMOTE SENSOR: infrared sensor for the remote control. 7. POWER INDICATOR: Shows red in standby mode. Shows blue when your TV is turned on.
TV INSTALL ATION DRAWINGS 6. TV INSTALL ATION DRAWINGS Power Cord Connection - Connect the power cord correctly as shown. - Press the Power of your LCD TV to turn on the LCD TV. The power indicator on the front panel lights up in blue . Antenna Connection To ensure good picture and sound, TV antenna system needs to be instalLCD. The antenna system as shown can be sourced from TV equipment shops, which will provide service for correct installation and connection.
TV INSTALL ATION DRAWINGS AV Connection Connect the VIDEO and AUDIO output jack of the DVD or VCR to the VIDEO jacks on the set using the RCA cable. Match the jack colors: Video is yellow, Audio left is white, and Audio right is red. Select the AV input source using the SOURCE button on the remote control. TV Back Video Cable AUDIO cable VIDEO R L DVD or VCR Back DVD or VCR YPbPr (Component) Connection Connect the YPbPr output of the DVD or VCR to the YPbPr input on the set.
TV INSTALL ATION DRAWINGS VGA(PC) Connection Connect the RGB output of the PC to the VGA(PC) jack on the set. Connect the AUDIO output of the PC to the PC AUDIO jack on the set . Select the RGB input source with using the SOURCE button on the remote control. TV Back VGA Cable RGB-PC OUTPUT Audio Cable AUDIO COAXIAL Connection Connect to Audio Amplifier device to the Coaxial output jack on the TV.
TV INSTALL ATION DRAWINGS HDMI Connection HDMI plug which replaces the HDMI connection allows transfer of all audio/video/control signals through one cable only. These signals are transferred in digital. TV Back HDMI Cable DVD Back Service Port Function Service port: (For factory uses only.) TV Back USB Cable Wall Mounting The TV is provided with mounting holes for a VESA approved wall mounting bracket (NOT SUPPLIED).
REMOTE CONTROL 7 . REMOTE CONTROL Remote control instructions in TV mode MUTE MUTE P.MODE POWER S.MODE SLEEP Press to mute the sound. Press again or press Vol+ to un-mute the TV. POWER Turn the TV ON or OFF. MTS 1 2 3 4 5 6 P.MODE Press repeatedly to cycle through the available video picture modes. 7 8 9 S.MODE Press to cycle through the different sound settings. - 0 CH.LIST ASPECT A B SLEEP Lets you select amount of time before your TV turn itself off automatically.
REMOTE CONTROL Remote control instructions in TV mode MUTE P.MODE POWER S.MODE SLEEP MTS 1 2 3 4 5 6 7 8 9 - 0 CH.LIST ASPECT A B C CC D SOURCE MENU OK ENTER DISPLAY EXIT + ADD/ ERASE VOL+/VOLPress to increase / decrease the sound level. CH+/CHPress to scan through channels. FAV Press to display the favorite list in TV mode. ADD/ERASE Add or Erase favorite channels. FAV VOL FAV.CH A Single push>switch to FAV channel A; Push and hold>store current channel in A. FAV.
REMOTE CONTROL Remote control setup 1. Open the cover. 2. Uses two AAA size batteries.When inserting the batteries, make sure correct polarities “+”and “-” . marks on the batteries line up correctly with compartment markings . 3. Replace the battery cover. To prevent battery leakage which may result in bodily injury or damage to the remote: 1. Install all batteries correctly, and as marked on the remote control. 2. Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.) Batteries.
MENU OPERATION 8. MENU OPERATION SETUP WIZARD Select Language Select the language you want. Select Language Welcome to the SEIKI HDTV Setup Wizard. Follow this guide to help setup your HDTV for scanning channels or accessing your external devices for Antenna, Set-top Box, Bluray, DVD, Games and other player.
MENU OPERATION Select Input Source Select your Connection devices... Connect to Game, Blu-Ray,DVD, or other player Antenna or coaxial cable input Back MENU :Return :Move ENTER :Press to Enter Select the Game, Blu-Ray, DVD, or other player . SOURCE LIST Page 1/2 TV AV YPbPr HDMI1 HDMI2 HDMI3 PC :Select :Page ENTER :Press to Enter Select the TV (or the Antenna or cable input). Scanning Channel Program AUTO CHANNEL SEARCH - Air Now Searching... Please Wait...
MENU OPERATION SELECT INPUT SOURCE Source Select TV AV Press SOURCE button to display the input source list. YPbPr Press ▼/▲ button to select the input source you want to watch. HDMI1 Press ENTER button to enter the selected source. HDMI2 HDMI3 PC BASIC OPERATION PICTURE SOUND CHANNEL PARENTAL SETUP OTHERS Press MENU button to display the MAIN MENU. Press◄/►button to select the MENU you would like to choose. Press ENTER button to enter the sub menu.
MENU OPERATION PICTURE MENU PICTURE Picture Settings Screen Size Wide PC Settings Color Temperature Normal Advanced Picture Settings MENU :Return :Move ENTER :Go to Next Menu Picture Settings 1.Press ENTER when the Picture Settings item is highlighted. Then you will go to the sub-menu as following. 2.Press ▼/▲ to select the desired menu item. Press ENTER to proceed if necessary. 3.Press ◄/► to the desired level. 4.
MENU OPERATION Color 50 Color Press ▼/▲ button to select Color, then press ◄/► button to adjust. Tint Tint 0 Press ▼/▲ button to select Tint, then press ◄/► button to adjust. Sharpness Sharpness 50 Press ▼/▲ button to select Sharpness, then press ◄/► button to adjust. Screen Size Screen Size Press ▼/▲ button to select Screen Size, then press ◄/► button to adjust. Available Screen Size: Standard, Wide, Wide Zoom, Zoom.
MENU OPERATION Dynamic Contrast Press▼/▲button to select the item Dynamic Contrast Mode , then press ◄/► button to adjust. This option can adjust the contrast corresponding to the input signal in order to improve the picture quality that is displayed. Available Mode: On/Off. Dynamic Contrast Film Mode Press ▼/▲ button to select the item Film Mode, then press ◄/► button to adjust. This option handles 3:2 pull down and 2:2 pull down. Available Film Mode: On/Off.
MENU OPERATION SOUND SETTINGS Sound Mode User Bass Treble Balance MENU :Return :Move :Change Setting Sound Mode Press ▼/▲button to select the item Sound Mode, then press ◄/► button to adjust. Options can only be adjusted manually in the USER mode. Available Sound Modes: User, Music, Standard, Movie. Bass Press ▼/▲ button to select the item Bass, then press ◄/► button to adjust. Treble Press ▼/▲ button to select the item Treble, then press ◄/► button to adjust.
MENU OPERATION AVL Press ▼/▲ button to select the item AVL , then press ENTER button to select Enable/Disable. AVL Level can stabilize the volume across all programs and commercials. Analog Sound Press ▼/▲ button to select the item Preferred Analog Sound, then press ◄/► button to select the prefer audio when switching to an analog channel. Available Analog Sound: Stereo, Mono,SAP.
MENU OPERATION Channel List Press ▼/▲ button to select Channel List, then press ENTER button to scan the Channel List. If you select the option “Channel List” On, the channel label will display in the list. Page 1/1 CHANNEL LIST A4 A11 A14 A63 MENU :Return :Move :Page ENTER :Select Favorite List Press ▼/▲ button to select Favorite List, then press ENTER button to scan the Favorite Channel List.
MENU OPERATION Signal Type Press ▼/▲ button to select Signal Type, then press ◄/► button to select the type you want to set. There are two selections: Air and Cable. Auto Channel Search Press ▼/▲ button to select Auto Channel Search, then press ENTER button to search channel. A Channel Search Menu will appear as below. AUTO CHANNEL SEARCH-Air Now Searching... Please Wait...
MENU OPERATION V-CHIP US V-Chip Canada V-Chip Block UnRated Show Downloadable Rating Clear Downloadable Data MENU :Return :Move ENTER :Go to Next Menu US V-CHIP Press ▼/▲ button to select US V-CHIP, then press ENTER button to adjust. A sub menu will appear as below. USA Movie Rating TV Rating MENU :Return :Move Movie Rating Press ▼/▲ button to select Movie Rating, then press ENTER button to adjust. A sub menu will appear as below.
MENU OPERATION TV Rating Press ▼/▲ button to select TV Rating, then press ENTER button to adjust. A sub menu will appear as below. TV RATING D L S V FV TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA MENU :Return :Move ENTER :Lock/Unlock Press ▼/▲/◄/►button to select Rating, then press ENTER button to lock. CANADA V-CHIP Press ▼/▲ button to select CANADA V-CHIP, then press ENTER button to adjust. A sub menu will appear as below.
MENU OPERATION Block UnRated Show Press ◄/► button to select Block UnRated Show, then press OK button to set the rating locked. Downloadable Rating Press ▼/▲ button to select Downloadable Rating, then press OK button to set the rating. If the DTV program doesn’t have this rating information, this option will be in gray. Clear Downloadable Data Press ▼/▲ button to select Clear Downloadable Data, then press OK button to set the rating.
MENU OPERATION Keypad Lock Press ▼/▲ button to select Keypad Lock, then press ENTER button to select On/Off. Source Lock Press ▼/▲ button to select Source Lock, then press ENTER button to enter the sub menu. Press ▼/▲ button to select Source, then press ENTER button to set the Source Lock . You can’t enter the locked source if you set the Source lock.
MENU OPERATION Caption Display Press ▼/▲ button to select Caption Display, then press ◄/► button to select ON or OFF. Analog Caption Type Press ▼/▲ button to select Analog Caption Type, then press ◄/► button to select the type. Available type: CC1, CC2, CC3, CC4, TEXT1, TEXT2, TEXT3, TEXT4. Digital Caption Type Press ▼/▲ button to select Digital Caption Type, then press ◄/► button to select the type. Available type: Service1~6.
MENU OPERATION Clock Press ▼/▲ button to select the Clock, then press ENTER to edit. CLOCK Time Zone Alaska Auto Clock Setup Time 2009-10-21 20:00:00 Day Of Week Wed Daylight Saving Time MENU :Return :Move :Change Setting Time Zone Press ▼/▲ button to select Timer Zone, then press ◄/► button to set. Available Size: Central, Mountain, Pacific, Alaska, Hawaii, Samoa, Newfoundland, Atlantic, Eastern. Auto Clock Press ▼/▲ button to select Auto Clock, then press ENTER button to set it Enable/Disable.
MENU OPERATION No Signal Power Off Press▼/▲ button to select No Signal Power Off, then press ENTER button to select it On or Off. When On and there is no signal input for 10 minutes, it will turn off the TV. No Operation Power Off Press ▼/▲ button to select No Operation Power Off, then press ENTER button to select it On or Off. When On and there is no operation input for 3 hours, it will turn off the TV. All Reset Press ▼/▲ button to select All Reset, then press ENTER button to execute reset.
MENU OPERATION Picture Settings 1.Press ENTER when the Picture Settings item is highlighted. Then you will go to the sub-menu as following. 2.Press ▼/▲ to select the desired menu item. Press ENTER to proceed if necessary. 3.Press ◄/► to adjust the item to the desired level. 4.When you have changed the settings, you can exit from the menu by pressing MENU/EXIT.
MENU OPERATION Screen Size 1.Press OK when the Screen Size item is highlighted. Then you will go to the sub-menu as following. 2.Press▼/▲ to select the desired menu item. Press ENTER to proceed if necessary. 3.Press ◄/► to adjust the item to the desired level. 4.When you have changed the size, you can exit from the menu by pressing MENU/EXIT.
MENU OPERATION Auto Adjust Press ▼/▲ button to select Auto Adjust, then press ENTER button to start auto adjusting. Horizontal Position Press ▼/▲ button to select Horizontal Position, then press ◄/► button to adjust. Horizontal Position 0 Vertical Position Press ▼/▲ button to select Vertical Position, then press ◄/► button toadjust. Vertical Position 0 Clock Press ▼/▲ button to select Clock, then press ◄/► button to adjust.
TROUBLESHOOTING 9.
TROUBLESHOOTING 36
TROUBLESHOOTING 37
SPECIFICATIONS 10. SPECIFICATIONS This manual is only for your reference, any change to the design and specification will not be advised. Screen Size 31.
