7KG TOP LOAD WASHING MACHINE INSTRUCTION MANUAL MODEL: SC-7000AU7TL Please read this manual carefully before using, and keep it for future reference.
CONTENTS General Safety 4 Product Overview 8 Getting Started 10 Levelling the appliance 11 Connecting the water inlet hose 12 Connecting the Drain Hose 13 Instructions 14 Operations 17 Cleaning and Maintenance 19 FAQs 21 Specifications 22 Customer Helpline 24
GENERAL SAFETY IMPORTANT INFORMATION Read this manual thoroughly before you start using the Top Load Washing Machine. The safety precautions instructions reduces the risk of fire, electric shock and injury when correctly complied to. Please follow all instructions and take notice of all warnings. Pay close attention to messages that follow this safety alert symbol or the words DANGER, WARNING or CAUTION. These words will be used to alert you of potential hazards that and injure you and others.
GENERAL SAFETY INSTRUCTIONS (Cont.) ELECTRICAL SAFETY • Voltage: Plug the appliance to a 220-240V, 50Hz, properly earthed power outlet, it must be in good working order. • Power connection: Do not use an adaptor or an extension cord. Plug the power plug directly into a separate power point that cannot be accidentally turned off, and that is easily accessible so you can switch it off if needed. • Power cord: Do not kink or damage the power supply cord.
GENERAL SAFETY INSTRUCTIONS (Cont.) USAGE CONDITIONS AND RESTRICTIONS • Supervision over children is to ensure that they do not play with the appliance. Never allow them to use, play with or crawl inside the appliance. Cleaning and maintenance must not be done by children.
GENERAL SAFETY INSTRUCTIONS (Cont.) CLEANING AND MAINTENANCE • Before cleaning or maintenance, always unplug the appliance from the power socket. Make sure you pull by the plug, not the cord as this can damage the power cord and cause a hazard. • Only the filter requires regular cleaning, everything else is non user-serviceable parts. Do not try to repair, disassemble or modify the appliance.
PRODUCT OVERVIEW 8
PRODUCT OVERVIEW (Cont.) CONTROL PANEL 1. ON/OFF: ON/OFF button allows you to turn the appliance off or on. 2. START/PAUSE: Press this button to start or pause the washing cycle. 3. WATER LEVEL: Before washing, you can select the water level according to how dirty the items are, materials or the weight. 4. FUNCTION: This will show the types of spins in process according to the cycle thats in progress. 5.
GETTING STARTED Before installing your appliance, read all safety instructions in this manual, especially the sections on electrical safety and installation. UNPACKING • When unpacking the appliance, be sure to keep all the packaging materials until you have made sure your new appliance is undamaged and in good working order. Plastic can be a suffocation hazard for babies and young children, make sure the materials are out of their reach.
GETTING STARTED (Cont.) IMPORTANT! Installing the bottom cover • Make sure the power cord is unplugged from the mains supply. • Place some padding (such as a soft mat, blanket or thick towel) on the floor and gently lay the washing machine on the padding, back side down. Take care not to dent the housing. • Insert the bottom cover into the hooks of the leg, pushing it straight until it reaches into the front hooks. • Ensure to fasten the bottom cover with the supplied screws.
GETTING STARTED (Cont.) CONNECTING THE WATER INLET HOSE IMPORTANT! To prevent leakage or water damage please follow the below instructions. Do not kink, crush, modify or sever the water inlet hose. • Connect the inlet pipe as indicated, there are two ways of connecting the inlet pipe. • Minimum Inlet Water Pressure: 0.1MPa Maximum Inlet Water Pressure: 0.6MPa 1. Connection between the Tap and inlet hose. 2. Connection between the screw tap and inlet hose.
GETTING STARTED (Cont.) CONNECTING THE DRAIN HOSE • Do not kink or protract the drain hose. Position the drain hose correctly other wise damage will result in water leakage. • The height of the water drain hose can be from 86 to 100cm. • Do not bend the drain hose or place it under the washing machine. • Be sure to only use new hose sets when connecting the Washing Machine. Do not re-use old hoses.
INSTRUCTIONS BEFORE FIRST USE • Make sure the washing machine is completely level as to previous instructions on how to level your washing machine. • Make sure the water inlet hose is installed correctly. • Make sure that the washing machine is plugged into the power socket. • When the water inlet hose is installed, turn on the water supply on the tap.
INSTRUCTIONS (Cont.) • Make sure that the appliance is in a correct working temperature (0-40˚C). If the appliance is used under 0˚C the inlet valve and draining system may be damaged. • Make sure that all labels are checked on items if they can be washed. • Use non-foaming or less-foaming detergents which are more suitable for washing machines to wash correctly.
INSTRUCTIONS (Cont.) WASH CARE SYMBOLS When choosing a wash program, check for any labels on your clothes and follow the instructions. below are some commonly used symbols.
OPERATIONS PROGRAMS Select the desired programs according to the clothes that are being washed. PROGRAMS Standard Standard fabric washing program suitable to wash cotton fabrics. Quick Suitable to wash lightly stained clothes. Blanket Suitable to wash big sized items such as curtains, bedsheets, blankets. Additional 15 minutes is added to the cycle for more movement and soaking time. Delicates Low/Mid/High water level selection with a soft and slow washing for delicate items placed in appliance.
OPERATIONS (Cont.
CLEANING AND MAINTENANCE WARNING: • Before starting maintenance, ensure that the appliance is unplugged and close the tap. CLEANING THE CABINET Proper maintenance on the washing machine can extend its working life. The surface can be cleaned with diluted non-abrasive neutral detergents when necessary. If there is any water overflow, use a wet cloth to wipe it off immediately. Make sure no sharp items are used to clean the appliance.
CLEANING AND MAINTENANCE (Cont.) CLEANING THE DRAIN PUMP FILTER 1 Drain the water out of the pump under which you use a container to collect the water. 2 Loosen the pump cover. (anti-clockwise) 3 Take out the lint filter. 4 Clean the filter. 5 Restore it and adjust the convex place to align at the pump hole.
FAQs Please be sure to contact our call centre on 1300 296 699 if you cannot identify the issue with the below information. Problem No water is flowing in No washing Solution • Check to see if the power is on • The water supply is cut off or the water pressure is too low. • The inlet hose is properly connected and the water tap is opened. • The filtering screen of inlet valve is blocked by dirt. • The coil of the inlet valve is damaged. • Make sure the Start/Pause button hasnt been pressed.
SPECIFICATIONS Power Supply 220-240V~50Hz Standard Water Pressure 0.1MPa~0.
CUSTOMER HELPLINE: 1300 296 699 DISTRIBUTED BY: Ayonz Pty Ltd 24
