User Manual

16
INSTRUCTIONS
BEFORE USING THE GAS COOKTOP
• Before first time use of the Gas Cooktop and that it has been professionally
installed. Please read through this manual especially the safety instructions
at the beginning of the manual.
• Make sure Cooktop is correctly plugged into the wall outlet and power is
switched on.
LIGHTING THE GAS COOKTOP
• The control panel on right side will indicate settings for each burner, there is
a small diagram that shows 4 circles and the filled in circle will indicate which
burner the control is used for.
• Press down and turn the knob anti-clockwise from the above position to
the maximum flame position next to the star.
Keep the control knob pressed and the ignition sparks will flicker until the
flame ignites.
• As the flame ignites stop pressing down and turn the knob anywhere between
Maximum or minimum setting.
DO NOT SET IT BETWEEN MAXIMUM AND OFF.
• In the case of the burner flame accidently being extinguished, make sure you
turn off the burner control and wait a minute before reigniting it.
• When finished with Gas Cooktop make sure to always turn the control knob
to the Off position.